Zebra CBL-DC-375A1-01 DC Power Cable 5ft
Overview
The Zebra CBL-DC-375A1-01 is a 5-foot DC power cable engineered to connect Zebra handheld scanning devices to the PWR-BGA12V50W0WW AC/DC power adapter. This wired connectivity solution delivers consistent power for field operations and docking workflows in warehouse, retail, and logistics environments where reliable charging is non-negotiable.
Key Features
- 5-Foot Cable Length: Provides enough reach to position charging docks, cradles, or workstations away from wall outlets — practical for high-traffic areas where foot traffic or equipment placement matters. Longer than 3-foot variants, so you won't feel constrained in typical warehouse or retail counter setups.
- Dedicated PWR-BGA12V50W0WW Compatibility: This cable is purpose-built for Zebra's PWR-BGA12V50W0WW 50W power adapter. Using a matched cable and adapter pairing ensures voltage stability and connector fit — no adapter mismatch headaches or device power faults during critical scanning operations.
- Handheld Scanner Integration: Supports Zebra's standard handheld scanner platform, so if your fleet runs MC9300, MC3300, or similar wired-charging configurations, this cable fits directly into your existing infrastructure without forcing equipment swaps.
- Warehouse and Retail Deployment Ready: The 5-foot length accommodates common docking bay, checkout counter, and warehouse station layouts where multiple scanners rotate through charging. No need to run separate extension cables or improvise power runs.
- Straightforward Installation: Simply connect one end to the PWR-BGA12V50W0WW adapter output and the other to your scanner's charging port. No configuration, firmware, or software — just power delivery.
Integration & Compatibility
The CBL-DC-375A1-01 (often searched as CBL DC 375A1 01) is designed exclusively for the PWR-BGA12V50W0WW power adapter. Verify your adapter model before ordering — using this cable with a non-matching adapter may result in poor contact, intermittent charging, or device damage. This cable supports Zebra's wired charging ecosystem across standard handheld scanner platforms used in barcode scanners and mobile data capture workflows.
Why This Cable Matters
In warehouse and retail environments, downtime from charging cable failures translates directly to lost scan productivity. A dedicated, matched cable eliminates adapter-to-device connector uncertainty — one less variable to troubleshoot. The 5-foot length prevents you from overstocking multiple cables or daisy-chaining extensions, which introduces failure points. Whether you're deploying a single scanner dock or a multi-unit charging station, having a purposefully designed Zebra cable reduces maintenance overhead and keeps devices powered predictably.
When to Choose a Different Configuration
If you're using a different Zebra power adapter model (e.g., PWR-BGA12V50W0WW variant or a third-party universal power solution), this specific cable will not be compatible. Check your adapter model and part number before purchase. If you need a shorter cable for compact docking, consider asking your supplier about 3-foot alternatives in the same family. If your handheld scanner uses USB-C or micro-USB charging instead of dedicated barrel connectors, you'll need a different cable entirely.
Frequently Asked Questions
Q: Is the CBL-DC-375A1-01 compatible with all Zebra power adapters?
A: No. This cable is engineered specifically for the PWR-BGA12V50W0WW adapter. Using it with a different adapter model may result in poor connection or device damage. Always verify your adapter part number before ordering.
Q: What is the cable length, and is a longer variant available?
A: This cable is 5 feet long. For different lengths, consult your supplier about other variants in the Zebra cable family.
Q: Can I use this cable with my USB-charging handheld scanner?
A: No. The CBL-DC-375A1-01 is designed for barrel-connector handheld scanners that work with the PWR-BGA12V50W0WW DC power adapter. USB-charging devices require a different cable type.
Q: What happens if I use the wrong power adapter with this cable?
A: Mismatched adapters can cause loose connections, inconsistent charging, or device failure. Always use this cable exclusively with the PWR-BGA12V50W0WW adapter.
Q: Is this cable shielded against interference?
A: Consult the product datasheet or manufacturer documentation for detailed cable construction specs, including shielding. For noisy RF environments, confirm with technical support before deployment.
Q: What environments is this cable rated for?
A: The CBL-DC-375A1-01 is designed for indoor use in standard warehouse, retail, and office settings. If you need outdoor or high-temperature deployment, verify environmental ratings with the manufacturer.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Zebra CBL-DC-375A1-01 is a straightforward but critical piece of infrastructure. You're buying a 5-foot barrel-connector DC power cable matched to the PWR-BGA12V50W0WW 50W adapter — nothing flashy, but it's the difference between predictable charging and intermittent power faults that kill scanner uptime in retail and warehouse operations.
Technical Highlights:
- 5-Foot Length: Enough clearance to position docks away from wall outlets in typical warehouse and retail counter layouts, without resorting to extension cables that introduce connection points and failure risk.
- Barrel Connector Design: Purpose-built for the PWR-BGA12V50W0WW's DC output connector — no adapter plate adapters, no guessing. Direct fit eliminates loose contact issues that plague mismatched generic cables.
- Standard Handheld Platform Support: Compatible with Zebra's wired-charging scanner ecosystem (e.g., MC9300, MC3300 family). If your fleet relies on dedicated docking cradles for overnight or shift-end charging, this cable integrates without platform swaps.
Deployment Considerations:
- Adapter Pairing is Non-Negotiable: This cable only works with PWR-BGA12V50W0WW. If you inherit or swap adapters, verify the model before connecting — wrong adapter = poor charging or device risk. Audit your adapter stock before bulk cable orders.
- Indoor Environment Only: The CBL-DC-375A1-01 is not rated for outdoor, high-temperature, or high-humidity environments. If your charging dock sits on a warehouse loading dock exposed to temperature swings or condensation, confirm environmental limits with the manufacturer before deployment.
- No Built-In Surge Protection: This is a passive power cable, not a surge-protected power strip. If lightning or mains transients are a concern, protect the PWR-BGA12V50W0WW adapter inlet with a UPS or surge protector — the cable itself has no conditioning logic.
Deploy this cable when you're standing up a reliable, predictable charging station for a fleet of Zebra handheld scanners in a retail or warehouse environment. It's not a novelty; it's the proven connector between your adapter and scanner. Order a backup for every active dock — cable failures are common enough that spares justify their cost against downtime.
