Camden products
-
Camden
SKU: CX-SA1
Camden CX-SA1 TCP/IP Network Switch Lock
- TCP/IP integration routes lock events and audit logs through your central management platform.
- Form C relay (NO/NC) supports both fail-safe and fail-secure door configurations at 2A/24V.
- Included MOV suppressor protects relay contacts from back-EMF damage on 24/7 duty cycles.
$130.00 $79.99 Save $50.01 -
Camden
SKU: CX-RIM-SB
Camden Aluminum surface mounted adapter box for - CX-RIM-SB
- Eliminates strike alignment guesswork on double-door RIM assemblies via included jig.
- Compatible with CX-EPD1289L and CX-EPD1299L electric RIM strikes for predictable fit.
- Aluminum surface-mount housing (9.19" × 1.97" × 1.25") ships with full fastener kit.
$84.99 -
Camden
SKU: CX-PS13V3
Camden CX-PS13V3 Variable Output Linear Power Supply
- Selectable fixed voltages (6–24VDC) or continuous pot adjustment suits varied strike loads.
- Integrated gel cell charging and automatic AC-failure failover maintain door access during outages.
- Resettable PPTC fuse and sub-40mV ripple prevent nuisance lockouts on sensitive solenoid strikes.
$42.99 -
Camden
SKU: CX-MA1214-25D
Camden CX-MA1214-25D 1" Spacer Plate for 1200 lb Magnetic Lock
- Fills frame rabbet gaps to maintain full-surface magnetic contact on 1200 lb locks.
- Compatible with CX-91S-12 surface-mount and CX-91M-12 mortise-mount lock models only.
- Single 1-inch plate keeps strike perpendicular without rotational stress on the lock body.
$133.99 -
Camden
SKU: CX-MA1214-25
Camden CX-MA1214-25 1" Spacer Plate for Magnetic Lock
- Maintains 1,200 lb holding force by correcting strike-face misalignment on non-standard frames.
- Compatible with CX-91S-12 surface-mount and CX-91M-06 mortise-mount 24VDC magnetic locks.
- Fixed 1" steel thickness resolves frame depth issues in retrofits and aluminum stile assemblies.
$66.99 -
Camden
SKU: CX-IRB
Camden Isolation Relay Module - CX-IRB
- DPDT architecture provides four contact states (N.O./N.C. per pole) from one module.
- Jumper-selectable 12/24 VDC input eliminates dual-SKU stocking across mixed voltage sites.
- 40 mA draw at both voltages safely sources from low-power access control buses.
$26.99 -
Camden
SKU: CX-EPD1299L
Camden 1/2\" Surface mount Grade 1 RIM strike with - CX-EPD1299L
- Grade 1 ANSI/BHMA A156.31 rated with 1,500 lbs static and 70 ft-lbs dynamic holding force.
- Field-selectable 12/24V AC/DC via internal jumper eliminates rewiring across mixed-voltage sites.
- Surface-mount design with spacer plates fits 1/2"–3/4" RIM latch projection without frame cutting.
$484.48 $345.99 Save $138.49 -
Camden
SKU: CX-EPD1289L-BK
Camden All-black finish 3/4\" surface mount - CX-EPD1289L-BK
- 12/24V AC/DC jumper-selectable voltage reduces SKU count on multi-voltage sites.
- Fail-safe/fail-secure field-configurable via jumper—no strike swap needed.
- ANSI/BHMA Grade 1 and UL10C 3-hour fire-rated; survives 500k UL cycles minimum.
$650.00 $387.99 Save $262.01 -
Camden
SKU: CX-EPD1289L
Camden 3/4\" Surface mount Grade 1 RIM strike with - CX-EPD1289L
- ANSI/BHMA Grade 1 rated at 1,500 lb static strength resists forcible entry.
- Tolerates 15 lb preload—reliable in misaligned frames or HVAC pressure zones.
- Field-selectable 12/24VDC AC/DC cuts SKU count; non-handed fits left or right.
$575.00 $337.99 Save $237.01 -
Camden
SKU: CX-EMF-2PS
Camden CX-EMF-2PS Door Control and Power Supply Cabinet
- Accepts 7 dry contact inputs, enabling connection of readers, keypads, and RTE buttons.
- Five 3A Form C relay outputs drive magnetic locks and strikes across multi-door deployments.
- Microprocessor control with DIP switch mode selection allows logic changes without hardware swaps.
$911.00 $557.99 Save $353.01 -
Camden
SKU: CX-ED2079
Camden CX-ED2079 Electric Strike
- Field-selectable 12/24V AC/DC input fits existing controller outputs without rewiring.
- Grade 2 ANSI A156.31 rated: 1,000 lb static and 50 ft-lb dynamic holding strength.
- Fail-safe or fail-secure mode is mechanically switchable on-site, no rewiring needed.
$205.00 $123.99 Save $81.01 -
Camden
SKU: CX-ED1959RM-MB
Camden Outdoor rated Grade 1 strike for use - CX-ED1959RM-MB
- Outdoor-rated for gate and fence installs—no extra weatherproof enclosure needed.
- 12VDC/24VDC field-selectable; 24V at 140 mA cuts wire-gauge costs on long cable runs.
- Fail-safe or fail-secure configurable at install to meet AHJ, NFPA 70, and UL 1034 codes.
$480.00 $289.99 Save $190.01 -
Camden
SKU: CX-ED1689L-4
Camden Low profile strike body with (1) latch - CX-ED1689L-4
- Integrated latch monitor switch confirms door latch position for real-time status feedback.
- Operates on 12VDC, enabling direct tie-in to standard access control power supplies.
- Low-profile body fits discrete doorframe cavity installations in single-door deployments.
$625.00 $374.99 Save $250.01 -
Camden
SKU: CX-ED1379
Camden Electric Strike with (1) CX-ESF-2 and (1) - CX-ED1379
- TCP/IP connectivity eliminates relay modules and wires directly into Ethernet networks.
- Includes two ANSI round faceplates fitting 6-11/16" and 8-3/8" openings for fast install.
- 5-year manufacturer warranty covers materials and workmanship on all components.
$180.00 $109.99 Save $70.01 -
Camden
SKU: CX-ED1079L
Camden CX-ED1079L Low Profile Grade 1 Electric Strike
- 1.22" depth fits retrofit frames where standard 2"+ strikes cannot be installed.
- Grade 1 rated at 1,500 lbs static hold force for high-traffic commercial doors.
- 12/24V AC/DC selectable with SPDT latch monitor output for panel integration.
$250.00 $148.99 Save $101.01 -
Camden
SKU: CX-ED1079
Camden CX-ED1079 Low Profile Grade 1 Electric Strike
- Grade 1 ANSI A156.31-rated with 1,500 lbs static holding force for high-traffic doors.
- Field-selectable 12VDC or 24VDC eliminates factory reconfiguration across multi-site installs.
- Low-profile 4.88"×1.88"×1.22" body fits standard frames with no modifications required.
$225.00 $135.99 Save $89.01 -
Camden
SKU: CX-ED0010
Camden CX-ED0010 Electromechanical Cabinet Lock
- 440 lb holding force handles high-traffic retail, medical, and evidence-locker duty.
- Dual 12/24VDC field selection integrates into legacy panels or modern IP controllers.
- Onboard door and lock sensors report status directly to ACS—no external relays needed.
$150.00 $90.99 Save $59.01 -
Camden
SKU: CX-DA400
Camden Door alarm with relays timers reset key double - CX-DA400
- Dual relay outputs control strikes, buzzers, or auxiliary devices from a single unit.
- TCP/IP communication enables remote monitoring and command execution over the network.
- Reset key provides manual override for emergency access without network dependency.
$950.00 $571.99 Save $378.01 -
Camden
SKU: CX-DA300
Camden Door alarm with relay and reset key double - CX-DA300
- Operates on 24VDC, sourcing directly from existing access control power supplies.
- TCP/IP communication enables remote monitoring within IP-connected security platforms.
- Relay output and manual reset key support field alarm acknowledgment and device control.
$570.00 $342.99 Save $227.01 -
Camden
SKU: CX-95S-7E
Camden CX-95S-7E Magnetic Door Holder Extension Bar 7"
- 7-inch standoff resolves frame depth or strike alignment issues in tight door assemblies.
- Compatible with CX-95S-DH surface and CX-95S-DH-FL floor mount base units at 12/24V AC/DC or 120V AC.
- No separate power required — extension bar draws power directly from the parent door holder magnet.
$36.99







