Lifesafety Power products
-
Lifesafety Power
SKU: RB8-BOXED
Lifesafety Power RB8-BOXED 8A Aux Relay DPDT Auto VLTG
- DPDT contacts provide two independent 8A switching paths for dual-circuit control.
- Auto voltage sensing (12V/24VDC) eliminates jumper config and reduces field wiring errors.
- Isolated relay contacts protect control panel electronics from load-side transients.
$54.00 $35.99 Save $18.01 -
Lifesafety Power
SKU: M8P-BOXED
Lifesafety Power M8P-BOXED 8 Output Managed Control Module
- Eight independently monitored outputs detect over-current faults and load anomalies in real time.
- Network-programmable failsafe/failsecure logic per output eliminates jumper configuration on-site.
- RS-485 connectivity enables centralized monitoring across distributed sites via NL4 or NLX modules.
$287.00 $188.99 Save $98.01 -
Lifesafety Power
SKU: M8-BOXED
Lifesafety Power M8-BOXED M8-Boxed
- Regulated DC output prevents device dropout during AC brownouts and voltage sag.
- Multi-channel architecture isolates faulted circuits, keeping the rest of the system online.
- Supports external battery backup integration for uninterrupted 24/7 operation.
$287.00 $188.99 Save $98.01 -
Lifesafety Power
SKU: FPO75-C4E1
Lifesafety Power FPO75-C4E1 4 Door Access Control 4 Lock Outputs
- Four individually fused 3A outputs isolate door circuits, preventing one fault from affecting others.
- 75W budget supports four EM locks or solenoid strikes at 12V or 24V without auxiliary boost.
- DIN-rail E1 enclosure mounts directly in access control cabinets, eliminating extra surface hardware.
$456.00 $299.99 Save $156.01 -
Lifesafety Power
SKU: FPO75-B100C4D8PE2M/T4-A
Lifesafety Power FPO75-B100C4D8PE2M/T4-A FPO75-B100C4D8PE2M/T4-A
- 75W output supports multi-output loads across distributed access control deployments.
- 24VDC rail aligns with standard security panels and IP camera input requirements.
- Compact form factor suits cabinet or DIN-rail enclosures with thermal constraints.
$1,150.00 $755.99 Save $394.01 -
Lifesafety Power
SKU: FPO75-B100C4D8E2S
Lifesafety Power FPO75-B100C4D8E2S 75W PS 6A/12V or 3A/24V 12V 2
- Dual primary output (6A/12V or 3A/24V) supports mixed lock ecosystems from one 75W unit.
- Four 3A relay outputs with per-relay FAI/failsafe/failsecure selection cut multi-door wiring time.
- Eight 3A auxiliary outputs with Bus1/Bus2 assignment eliminate external multiplexing hardware.
$904.00 $593.99 Save $310.01 -
Lifesafety Power
SKU: FPO250-C8D8E1
Lifesafety Power FPO250-C8D8E1 Unified Power Sys FPO250-C8D8E1
- 250W output supports 8–16 door strikes, readers, and auxiliary loads from 120V AC.
- 8 relay lock outputs (3A fused, failsafe/failsecure) eliminate external relay panels on most sites.
- Integrated fire alarm disconnect auto-unlocks doors on FAI contact closure for life-safety compliance.
$703.00 $461.99 Save $241.01 -
Lifesafety Power
SKU: FPO250/250-3C83D8PE12M
Lifesafety Power FPO250/250-3C83D8PE12M FPO250/250-3C83D8PE12M
- Two independent 250W supplies, each selectable 12V or 24V, eliminate add-on regulators.
- 24 relay lock outputs support failsafe, failsecure, or fire disconnect per zone.
- 24 auxiliary DC outputs power readers and keypads without consuming relay capacity.
$6,634.00 $4,357.99 Save $2,276.01 -
Lifesafety Power
SKU: FPO250/250-2C8P3D8PE8M2
Lifesafety Power FPO250/250-2C8P3D8PE8M2 FPO250/250 120/230VAC
- 500W unified platform powers up to 16 relay lock outputs and 24 auxiliary circuits.
- Integrated fire alarm disconnect releases all doors on FA signal—no secondary relay needed.
- Dual 120/230VAC auto-sensing input supports global deployments without hardware changes.
$2,647.00 $1,738.99 Save $908.01 -
Lifesafety Power
SKU: FPO150/250-2C8P2D8PE8M2
Lifesafety Power FPO150/250-2C8P2D8PE8M2 FPO150/250 dual voltage
- Accepts 120VAC or 240VAC automatically—no jumpers, one SKU covers mixed-voltage sites.
- Dual 12VDC output rails let door locks, readers, and intercoms run on independent circuits.
- Onboard dual-channel battery charging keeps critical loads live during mains power loss.
$2,568.00 $1,686.99 Save $881.01 -
Lifesafety Power
SKU: FPO150/250-2C83D8PE8M2/T16-C
Lifesafety Power FPO150/250-2C83D8PE8M2/T16-C Mercury ProWire FPO
- 400W total output across dual 12V/24V zones eliminates external converters in mixed deployments.
- 3 D8P auxiliary circuits (2.5A Class 2 each) and 2C8 relay outputs (3A fused) on a single board.
- Hardwired fire alarm disconnect triggers automatic door unlock via Form C NC/NO selectable contacts.
$4,133.00 $2,714.99 Save $1,418.01 -
Lifesafety Power
SKU: FPO150/250-B1002C82D8E12M
Lifesafety Power FPO150/250-B1002C82D8E12M 150W power supply 12A
- Selectable 150W or 250W mode delivers 12A/20A at 12VDC or 6A/10A at 24VDC.
- 16 fused outputs (8 relay + 8 aux DC) eliminate external relay modules in mixed-voltage cabinets.
- Per-output FAI, failsafe, or failsecure logic controls independent lock behavior per door group.
$5,997.00 $3,938.99 Save $2,058.01 -
Lifesafety Power
SKU: E4M-BOXED
Lifesafety Power E4M-Boxed Flexpower E4M / E4M1 / E4M2 / E4M3
- UL294-listed enclosure reduces compliance review cycles at system inspection.
- Removable backplate enables shop pre-wiring before transport, cutting field time.
- 6.5-inch depth houses battery backup alongside power boards—no extra cabinet needed.
$533.00 $350.99 Save $182.01 -
Lifesafety Power
SKU: E4M1-BOXED
Lifesafety Power E4M1-Boxed E4 Enclosure 20W X 24H X 45D Black
- Integrated 20W supply supports up to 5 Mercury/LNL boards without auxiliary power.
- Compact 20W×24H×4.5D steel enclosure mounts flush to walls in tight entry points.
- Pre-wired tamper switch signals your panel alarm input on unexpected door breach.
$687.00 $451.99 Save $235.01 -
Lifesafety Power
SKU: E12M-BOXED
Lifesafety Power E12M-BOXED MCLASS multi-purpose enclos E12M-BOXE
- 750W dual-voltage distribution supports up to 24-door access control deployments.
- Removable backplate enables full bench pre-wiring before on-site installation.
- 14-gauge welded steel with powder coat finish resists mechanical stress and corrosion.
$5,381.00 $3,534.99 Save $1,846.01 -
Lifesafety Power
SKU: D8-BOXED
Lifesafety Power D8-BOXED D8-Boxed 8 outputs fused at 3A each
- 8 independently fused 3A outputs prevent a single device fault from killing the entire system.
- Centralized boxed form factor consolidates power distribution into one enclosure-mounted unit.
- Supports up to 24A total capacity across mixed security devices from a single regulated source.
$51.00 $50.99 Save $0.01 -
Lifesafety Power
SKU: C8P-BOXED
Lifesafety Power C8P-BOXED C8P-BOXED
- 8 independent 24VDC outputs consolidate backup power for cameras, readers, and sensors.
- Integrated battery backup keeps critical security devices online during AC mains loss.
- Boxed enclosure fits rack and wall-mount installs, reducing cabinet footprint and cable sprawl.
$113.00 $74.99 Save $38.01 -
Lifesafety Power
SKU: C8-BOXED
Lifesafety Power C8-BOXED Relay Based Lock Control Module 4 Outpu
- 8 isolated relay outputs switch locks at independent doors without signal bleed-through.
- Dry contact inputs accept 5–24VDC logic from any access panel—no active driver required.
- 3–5A @ 24VDC contact rating handles mag-lock inrush and fail-safe strikes reliably.
$113.00 $74.99 Save $38.01 -
Lifesafety Power
SKU: C4-BOXED
Lifesafety Power C4-BOXED Lock output module 4 outputs fused
- Four independent 3A fused outputs prevent a single lock fault from disrupting other circuits.
- Supports mixed failsafe and fail-secure modes per output within the same installation.
- FAI-rated for fire alarm interface compatibility, meeting code requirements in life-safety deployments.
$88.00 $87.99 Save $0.01 -
Lifesafety Power
SKU: BT500-8R
Lifesafety Power BT500-8R BT Poe Midspan Injector 500W Universal
- 8 PoE ports at up to 90W each retrofit high-draw devices onto existing switches.
- 500W total capacity powers PTZ cameras, access control, and WAPs from one 1U unit.
- Onboard 48V battery charger maintains PoE delivery to critical ports on AC mains loss.
$1,736.00 $1,140.99 Save $595.01